Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[HammyUK]

Carbon air box - CHEAP!!!

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220218752540&ssPageName=ADME:B:WNA:GB:1123

[Jon177]

To fit a hawk modified Tank. Wont fit standard tank

[Andy J]

To fit a hawk modified Tank. Wont fit standard tank

 

maybe one for 'orse 

[HammyUK]

Same as on Wiz's and no mod.

[Jon177]

Same as on Wiz's and no mod.

He says you may need to mod the tank

[zx10r bob]

just says slite mod need jon,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, i looked at one of these with the ali bell mouths it gives about 10 bhp,,,,,,,,,,,the main mod is just lifting the hole tank up on spacers cus it has a bigger volume than standerd,,,,,,,,,,,,,,,,,,,,,

[Jon177]

Cool. A bit trick for your average ZX10R owner at a guess though.

How does it seal then

[zx10r bob]

the tank just sits on top of it,but because its taller,the rear tank bolts won`t fit and you need to put spacers under the tank at the head stock end as well,,,,,,,,,,

[HammyUK]

theres a rubber seal that goes aound the edge of the airbox, bit like your car door. Sounds very very good when you twist the loud handle

[ADF]

Cost over a grand new!! they're surely havin a Giraffe?

Had a modified airbox on my Mille, sounded awesome

[zx10r bob]

i must say i do like the big air noise from the ten,,,,,,,,,,don`nt think any other thou has the same induction sound at all..............


 

[arron24]

i was goona have this so i phoned him.....he said i mat have to slightly hammer out the bottom of my tank me thinks not.

however if all it needed was some spacers then im raging

[tim]

you can fit a standard tank on mine  but  you wont have the same volume  as a hollow bottom tank  but will still be more volume than a standard airbox