ZX 10 R Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Pages: [1]   Go Down

Author Topic: New member.  (Read 357 times)

lovin_it

  • Newbie
  • *
  • Personal BHP 0
  • Posts: 2
New member.
« on: May 16, 2022, 03:34:41 PM »

Hi all. New member joined to say hello and learn.
Based in Ipswich, 48 years old.
3 weeks ago I picked up a 2015 30th anniversary edition with 7500 miles on. Always wanted a ninja, moved from a k2 GSXR 1000 that I had 6 years ago!
So far done a R&G tail tidy, scorpion exhaust, R&G crash bungs and a really good clean.
Can some just tell me standard teeth on sprockets?
Thanks.
« Last Edit: May 16, 2022, 03:37:21 PM by lovin_it »
Logged

michael4012

  • Club Racer
  • ****
  • Personal BHP 30
  • Posts: 1417
Re: New member.
« Reply #1 on: May 16, 2022, 06:42:10 PM »

Welcome buddie, post up pictures of the girl then :tongue3: Answering your question, 17-39 525 pitch  :icon_thumleft:
Logged

GRNINJA

  • Super Dooper
  • Administrator
  • GP Hero
  • *****
  • Personal BHP 676
  • Posts: 25343
  • -ZX10R Ninja-
Re: New member.
« Reply #2 on: May 16, 2022, 07:13:47 PM »

Welcome buddie, post up pictures of the girl then :tongue3: Answering your question, 17-39 525 pitch  :icon_thumleft:

Welcome in buddy standard is 17 front 39 rear

They are very tall as standard and makes the bike a bit unusable if you go on track

I recommend -1 front +1 rear for a nice happy medium for smaller tracks +2 or even +3

If you ride road only then -1 front or plus 3 rear would suffice
Logged
Ride it like you stole it - or at least try

lovin_it

  • Newbie
  • *
  • Personal BHP 0
  • Posts: 2
Re: New member.
« Reply #3 on: May 16, 2022, 08:13:43 PM »

Thanks guys, and that’s good news. As. When I was giving the chain and sprockets a good clean I counted and right now I have a 16 front, 39 rear. I wondered because the front has lifted when I gave her some beans, not very high because I was being careful as not ever had this much bhp!
Logged

michael4012

  • Club Racer
  • ****
  • Personal BHP 30
  • Posts: 1417
Re: New member.
« Reply #4 on: May 16, 2022, 10:01:14 PM »

 :-P Enjoy  :icon_thumright:
Logged

ScorpZX10R

  • Newbie
  • *
  • Personal BHP 0
  • Posts: 5
Re: New member.
« Reply #5 on: August 15, 2022, 10:53:11 PM »

Hi all. New member joined to say hello and learn.
Based in Ipswich, 48 years old.
3 weeks ago I picked up a 2015 30th anniversary edition with 7500 miles on. Always wanted a ninja, moved from a k2 GSXR 1000 that I had 6 years ago!
So far done a R&G tail tidy, scorpion exhaust, R&G crash bungs and a really good clean.
Can some just tell me standard teeth on sprockets?
Thanks.

I just got a 2015 with about 6000 miles on, its got +2 on the rear and a 525 chain conversion, plus Dymags, decat and a dyno tune, never seen such a linear power line (can't call it a curve) says it makes 190 bhp but I know Dynos can be made to say anything you want.. but its ideal for me coming from earlier gens with better stock low down powere, was worried the gen 4 was going to be too weak for me... but rode this one at Bolton Motorcycles on Saturday in the heat and it went well enough for me to buy it. I'm 49 this year.   
Logged
Pages: [1]   Go Up
 

Page created in 0.078 seconds with 15 queries.