Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[michael4012]

Iv got a pair of re-grind kent cams kawa- 30 & 32 with 3000 mile on em for a gen3 will also fit gen1 & 2 with the appropriate sprockets & screws. Usual price from kent is around £280 including your cams with a 2-3 week turn around. There yours for £150.00 

[zxyogi]

What sort of gains are you looking at fitted to a Gen 1 with a full system and a PC?

[michael4012]

What sort of gains are you looking at fitted to a Gen 1 with a full system and a PC?

I have no idea mate In the Gen 3 it makes (DID) make 6 horse at the top a little was taken out the middle but the motor would rev higher I think with yours if you dial in the stock cams there are gains to be made if you want more at the top. If you do that & ditch the PC3 with the TRE and get the woolich flash and dyno you will do nicely  Answering your question i don't know enough about the Gen 1 cams to quote wether the Kent cams i have would make a noticeable difference But you can call Kent Cams direct and ask for Tony he does all bike cams & will know. They are re-grind to kawa 30 inlet & kawa 32 exhaust   

[Matt83]

Absolute bargain price mate. My spare motor has got kit cams in it which will be similar lift and duration, it was great on road and track and put out a genuine 174bhp with a very, very mild tune. Buy them!

[michael4012]

NOW SOLD