Bike Stuff > Two Wheel waffle for all

Zx10r calipers

<< < (4/4)

NinjaPaul:
Correct. The Tokico calipers used on the gen1/gen2 bikes used 4 small pads as do the Nissin calipers from the ZX6R/ZZR14. The pads from both types of caliper are very similar barring the castellations size difference as mentioned. The gen3 Tokico calipers use 2 large pads.  :icon_thumleft:

michael4012:

--- Quote from: NinjaPaul on February 15, 2017, 12:36:04 AM ---Correct. The Tokico calipers used on the gen1/gen2 bikes used 4 small pads as do the Nissin calipers from the ZX6R/ZZR14. The pads from both types of caliper are very similar barring the castellations size difference as mentioned. The gen3 Tokico calipers use 2 large pads.  :icon_thumleft:

--- End quote ---
thanks for that mate  :icon_thumright: makes sense now.

ukzx10r:
Heres my old write up
http://forum.zx10r.co.uk/index.php/topic,19490.msg228303.html#msg228303

drewwilks:

--- Quote from: michael4012 on February 11, 2017, 02:06:48 PM ---
--- Quote from: drewwilks on February 11, 2017, 01:44:41 PM ---zzr1400 nissin calipers fit straight on my 07 and the pads from the old calipers need a meeting with a grinder to fit but work good

--- End quote ---
That's interesting just for future reference do you have any pictures of where you removed material ?

--- End quote ---
sorry just took a bit off each side of the metal untill the slid in  actual pad size not touched

Navigation

[0] Message Index

[*] Previous page