ZX 10 R Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Welcome ZX10R Ninja Owners!!!!!
Front Page Here
Can all new members that haven't posted please read the admin and announcement page for the forum rules.

Pages: 1 [2]   Go Down

Author Topic: What do you use.....  (Read 3221 times)

magic1

  • Club Racer
  • ****
  • Personal BHP 57
  • Posts: 998
Re: What do you use.....
« Reply #15 on: February 11, 2013, 09:54:37 PM »

I did think that strapping it down by the bars would possibly cause stress or possible damage to the bars
I,m going to adopt the method employed by bricrewe. Damage to the bars is not a concern using bar straps, it,s the compression on the front forks as you ratchet the bike down then do 120 miles with the bike bouncing about on the trailer with all the fork travel used up. :shock:
This way employs lateral tension rather than pulling the bike down.
Logged

Wellerman

  • Mini Moto Madmad
  • **
  • Personal BHP 1
  • Posts: 174
Re: What do you use.....
« Reply #16 on: February 12, 2013, 08:39:52 AM »

Are you not compressing the forks then using this method? I thought the idea of compressing the forks is so the bike doesn't bounce about possibly loosening the straps?
Logged
Ciao Marco

magic1

  • Club Racer
  • ****
  • Personal BHP 57
  • Posts: 998
Re: What do you use.....
« Reply #17 on: February 12, 2013, 05:23:58 PM »

Will compress the forks slightly but nowhere near the sort of tension the bar straps apply straight down ( my Ohlins fork seals are fragile) ! :roll:
Logged

bricrewe

  • Rookie Racer
  • ***
  • Personal BHP 5
  • Posts: 311
Re: What do you use.....
« Reply #18 on: February 12, 2013, 06:40:41 PM »

It definitely doesn't compress them as much my way, I busted a set of seals taking the bike to drop off for Cartagena with handlebar straps.
Logged
Pages: 1 [2]   Go Up
 

Page created in 0.088 seconds with 22 queries.