Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ZX10R-RACER]

[GRNINJA]

whats the spring rating for the shock

[ZX10R-RACER]

not sure buddy will check tomorrow , i have a few optional weights anyway

[MJJ_ZX6RR]

Morning,

A few questions please about some of these bits if I may.

More detail about the forks please. OEM forks with Ohlins internals (20mm?) by K-Tech? Or Ohlins R&T revalved by K-Tech?

The Dymags. Mag I presume rather than carbon. Are they noticably lighter than the OEM wheels?

Tokico Monoblocks? These are something aftermarket rather than the stock calipers that came with the 06/07? Normal bolt spacing and disk offset?

Thanks,

Martin.

[ZX10R-RACER]

Hi

The forks are oem forks with k-tech 20mm ohlins kit , the dymags are gold 5 spoke mag and are mint. They only weigh slightly less then stock wheels but do make the bike turn a bit quicker, there also a lot stronger than stock wheels.
The calipers will bolt straight on and the difference to the stock chocolate calipers is night and day! pound for pound this is the best mod you can do. Thing is with stronger brakes you need better forks 

[GRNINJA]

Hi

The forks are oem forks with k-tech 20mm ohlins kit , the dymags are gold 5 spoke mag and are mint. They only weigh slightly less then stock wheels but do make the bike turn a bit quicker, there also a lot stronger than stock wheels.
The calipers will bolt straight on and the difference to the stock chocolate calipers is night and day! pound for pound this is the best mod you can do. Thing is with stronger brakes you need better forks 

They are either K-tech 20mm internals or they are Ohlins 20mm internals they would be both
if k-tech done them I doubt they would use Ohlins internals to be honest

but the k-tech 20mm internals do the same job as the ohlins ones anyway
I had the k-tech 20mm on my race bike and the ohlins on my road bike ... didn't notice the difference 

[ZX10R-RACER]

its an ohlins kit

[GRNINJA]

its an ohlins kit

found the spring rate for that shock yet buddy 

[ZX10R-RACER]

cant make out the code on the spring but it was resprung for me , although i found that a bit soft n run with a lot of pre-load , so i would guess it would be about right for you.

[GRNINJA]

How much do you weigh ?

[ZX10R-RACER]

80 kg

[GRNINJA]

80 kg

I am 94kg without my leathers if its soft for you then it will be worse for me.... Do the ohlins springs for the white power shocks as I have a 95 spring here ??

[davemfox]

Liam,

What size is the brembo m/c?

Dave

[geemonster]

How much for standard wheels and wets, Also the cams how much differnce did they make?? Are they kent cams or KIT?? Many thanks gee