Gallery > Modification Gallery
Crownan's upgrade/modification thread (Gen 1)
faulksie:
1/5 throttle insert definitely better, doesn't take any getting used to ...
Cables just a little to tight will cause throttle to stick / be stiff ... little tip worth doing at same time, .... fit later cables with both adjusters near handlebar end, makes it much easier to set up properly, particularly when you've fitted an insert and have less adjustment to play with.
silverflash7367:
Hi, when you say, "fit later cables", would '06-'07 cables be ok?
Cheers
faulksie:
04 / 05 cables have one of the adjusters under the tank, (throttle body end)
example see ebay listing :- http://www.ebay.co.uk/itm/05-Kawasaki-ZX10-ZX-10R-ZX10R-ZX1000-Ninja-Throttle-Cables-Housing-/290648166511?pt=Motorcycles_Parts_Accessories&hash=item43abfb106f
06/07 have both adjusters handbar end.
see ebay listing example :- http://www.ebay.co.uk/itm/06-07-ZX-10R-ZX10R-Throttle-Cables-Guide-Tube-/270990878418?pt=Motorcycles_Parts_Accessories&hash=item3f1850a6d2
I'm currently working on what i think will be a better way to modify the cables when you fit a 1/5 insert, still using later type cables, will post up once completed and tested.
silverflash7367:
Thank you! I've got a 1/5 Throttle insert on the way. Ordering an '06 throttle cable today. I'm going to hold off fitting them, looking forward to your post.
Cheers
TheBo:
nice write up enjoyable read [clap]
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version