Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[jeffoboyo1]

hi all, as some of you may know i got me self a zxr750 trackbike (92) reg
when i done a trackday last saterday i noticed that the throttle dosnt return fast anuff if you know what i mean ! if i give it a quick vroom and let go of the throttle it dosnt settle back to idle as quick as it should. so is it just a case of removing the cover over the cables and trying to get some 3in1 oil in to the cable past the cable cover, or will it be abit more to it than that....
thanks jeffo.......

[zx10manic]

Could be the actual throttle grip rubbing on the bar end or on the switchgear. If not that, then yea some lube down the cables and all over the carb end with the springs and whatnot should do the trick.

[jeffoboyo1]

thanks for the reply mate.
when i open up the throttle cable case is anything likly to spring out and get lost as ive never opened one up before.
thanks jeffo....

[gnat]

No mate nothing in there to spring out,if your still using the 7R throttle tube change it to a 10r throttle tube as it's a cheap way to get a quick action throttle.  They may look the same but it does work.

[jeffoboyo1]

No mate nothing in there to spring out,if your still using the 7R throttle tube change it to a 10r throttle tube as it's a cheap way to get a quick action throttle.  They may look the same but it does work.

whats the tube mate , i no nothing ,  is that in the cable cover on the bars or near the carb's and what would i look for if i get 1 thats off a 10r..
thanks mate... jeffo

[gnat]

Do yourself a favour and buy this or search online for a free download of one.

http://www.ebay.co.uk/itm/KAWASAKI-ZXR750-ZXR-750-HAYNES-WORKSHOP-MANUAL-89-96-/110752176725?pt=UK_CarParts_Vehicles_Manuals_Litterature_ET&hash=item19c9581a55

[jeffoboyo1]

thanks gnat , will have look for free download first and if no luck will buy a haynes manual. have a pony for your trubbles mate.

[lost]

sounds like you have a air leak.carbs or vacum hoses sucking in air

[jeffoboyo1]

sounds like you have a air leak.carbs or vacum hoses sucking in air

it shuts off if im holding the grip and twist it back with my hand , but not shutting off if i let go of the grip, like if its not springin back on its own.....

[jeffoboyo1]

well i opened up the throttle cover today and it all looks abit worn, will a 10r grip and iners fit it ,!

[jeffoboyo1]

whats my options on renewing , do i need just the grip and inners or could it be the cables , cant see any frayed wire on cables.

[jeffoboyo1]

well looks like there is a kink in one of the cables and it has started to fray, so thought i would remove the cables and see if my local shop had some but when i was removing the fuel tank i must of hit the throttle cable link that screws to the side of the carb and ,yes, i snapped it of so not only do i need a cable but need carbs too. the joys of motoring 

[jeffoboyo1]

[r1ninja]

Could be the actual throttle grip rubbing on the bar end or on the switchgear. If not that, then yea some lube down the cables and all over the carb end with the springs and whatnot should do the trick.

+1

Also check the closing cable hasn't snapped and that the cable routing is correct

[jeffoboyo1]