Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Kwakaholic]

.... oh forgot !  :occasion14:you may need to swivel the tube around on the resa pot too ! ... its no biggy  ?

[simple]

Cheers Rog + bhp 

[Kwakaholic]

[Jim996]

thats probably why i'm so picky!!!!!!!

How come you fly in a 60 year old airframe design then?

how come we still use the wheel!!!!!!!!!!!!!!!!!!!???


COS IT WORKS!        AND IT WORKS WELL!!!!!!!!!!!!!!!
problem is, you guys never hear the background about what we do.........  and it never gets reported>............... 

Are you on the Nimrod R's or hunting subs out of Kinloss?

[JediZX10R]

Went a slightly different route, got a zx6r rear resevour and pipe and fitted under the right hand side panel on my o7 10, just had to fabricate (sounds so much more proffesional than "made" dont you think) a l bracket fron some stainless fitted that under the tank fixing bracket and all is sweet and tidy.

[Shongololo]

OOO Jedi I likeee

[JediZX10R]

why thankyou kind sir

[BonzoDog]

This is my solution, took about 1hr to make from 2mm alloy plate and I used wire wool and autosol to give it a nice finish 

It bolts to the rear peg mountings, curves behind the pipe and bolts to the metal bracket attached to the plastic heat shield. I might try another one in stainless, but this works great !

[Shongololo]

This is my solution, took about 1hr to make from 2mm alloy plate and I used wire wool and autosol to give it a nice finish 

It bolts to the rear peg mountings, curves behind the pipe and bolts to the metal bracket attached to the plastic heat shield. I might try another one in stainless, but this works great !

That looks good Bonzo, you wanna sell one?

p.s youfrom the band?

[Jon177]

Looks good Bonzodog but would look better powder coated black.

[BonzoDog]

You may be right - black powdercoat might look better. Anyone else think black would be better 

When I make Mk2 I can post a diagram with measurements if anyones interested (can't do it right away as I didn't measure or draw anything up, I used the back of a cereal packet as a template and cut to size)   

[GRNINJA]

yeah black would be better 

[slapknacker]

yes have to say the braided hose looks a bit pants,
the black colouring has rubbed of a bit.

so i applied black boot polish and that did the trick.

[Shongololo]

Went a slightly different route, got a zx6r rear resevour and pipe and fitted under the right hand side panel on my o7 10, just had to fabricate (sounds so much more proffesional than "made" dont you think) a l bracket fron some stainless fitted that under the tank fixing bracket and all is sweet and tidy.

Why did you get the zx6 pot? it looks like my standard one will fit? just need a longer pipe down.

[JediZX10R]

the 10s pot is twice the diameter of the 6's and when fitted up there the side panel wouldnt go back on