Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[gsxr7111000]

Thanks for all the help. Located a MV F4 swinagrm complete  not cheap.

What i will do is keep this thread updated with pictures as i go along.

Here is the arm, 1st thing is to paint black to match my 04 zx10r or leave it polished.

[fido]

Look forward to seeing the pics mate.

[silky22]

  

[jamma10566]

Nice arm! I was tempted myself. Dying to see it finished.
For my 2 pennies worth, i reckon you should paint it black to match the frame!

[fido]

Nice arm! I was tempted myself. Dying to see it finished.
For my 2 pennies worth, i reckon you should paint it black to match the frame!

 

[Cobra88]

Hi 711

Paint it to match the frame mate 

Regards
Rick

[jamma10566]

You going to be sticking with the Ducati back wheel?

[gsxr7111000]

The old swingarm  2009 swingarm is out.

Yes keeping the ducati wheel. Does anyone know if a zx6r 636 front wheel fits into the zx10r front end, Then i have a close match on the wheel style

Ordered the paint today

[Cobra88]

Hi 711

I would just source another Marchesini from a Ducati with some 300mm brembo discs

ZX6R was a 3 spoke before the B1H which had same design wheel as ZX10R (think that fits but possibly need ZX6R spindle) I have a spindle in toolbox

Regards
Rick

[gsxr7111000]

Anyone fitted a front duc wheel?
Plenty about

[Cobra88]

Hi 711

I know a guy that did but was not a ZX10R (was Z1000)

think the spacing for the discs is the only problem
think he had 3mm shaved from each side of the hub (can't remember for sure)Ducati has wider disc spacing i think (10R is about 130-131mm spacing between the disc friction part)
you just need to measure a Ducati
and turned up some new spacers to suit his spindle as the Marchesini had large bore bearings like most top spec wheels
and spacers are shouldered into the bearings rather than butting upto smaller bearings like they do on the std 10R

Won't be too hard as long as you have a local friendly engineering shop

but you will need to use Ducati bolt pattern discs on the Ducati wheel

Regards
Rick

[gsxr7111000]

Ill look into it.

I am a machinest anyway and have my own lathe and milling machine at the other workshop, So no job to small.

[Cobra88]

Hi 711

Perfect 

Regards
Rick

[cobra builder]

Bike looks good mate i've got a old tl1000r with a triumph single sided swing arm makes it look well different, could polish the frame to match the arm cheers daz

[silky22]

i'd love see pics of the tiller with a single swinger