Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[roy]

I think i spoke to tony83 (Ref some race i am having)  he advised me in option.
use 6r dog legs/bones
or add a extra 3 mm washer under the top mount and keep 04 parts.

i only covered 50 miles on the zx10r, feels good put wether is crap.

If i have this wrong please advice, the bike/ride hight is the same as OEE.

i just cut out two links from mine to 108 links now .  look in my post 
http://www.zx10r.co.uk/forum/index.php/topic,13892.0.html

[gsxr7111000]

[fringe80]

nice

[patrickg]

I think i spoke to tony83 (Ref some race i am having)  he advised me in option.
use 6r dog legs/bones
or add a extra 3 mm washer under the top mount and keep 04 parts.

i only covered 50 miles on the zx10r, feels good put wether is crap.

If i have this wrong please advice, the bike/ride hight is the same as OEE.

i just cut out two links from mine to 108 links now .  look in my post 
http://www.zx10r.co.uk/forum/index.php/topic,13892.0.html

Thanks for the link and information.. that is very helpful.

[gsxr7111000]

Make me a offer and you can have my full 09 set up.

[patrickg]

Yes i needed to take about 3 links out of the chain.

Thank you for the reply back. It will be helpful this summer when I get home.

[wing46]

 

[drewk8]

looks good to me

i hate the swing arm on my b1h 6r track bike? wonder if i could fit an 04/05 10r one in?

[tony83]

looks good to me

i hate the swing arm on my b1h 6r track bike? wonder if i could fit an 04/05 10r one in?

zx10 arm too wide at pivot point for a straight swap into a b1h. some one did it on perthstreetbikes.com - an aussie site. had to machine ends down new spacers also wheel hub too narrow left to right if you know what i mean so had to sort chainline and make new rear caliper carrier etc. not a massive job but enough to put people off from doing it on a whim...

[drewk8]

 

thanks for that! puts me off!lol

 

[koreanbaz]

So, with an 09 swingarm in an 04 bike, what wheel  and cush drive did you use and did it require any alterations?

[roy]

read my post it tells you all you need .   if not tony or hammy can help 

http://www.zx10r.co.uk/forum/index.php/topic,13892.0.html

[koreanbaz]

read my post it tells you all you need .   if not tony or hammy can help 

http://www.zx10r.co.uk/forum/index.php/topic,13892.0.html

now read. cheers

[gsxr7111000]