Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[eck in fife 08]

bought a f/paddock stand for my 7r before i got my 10r,used it once on my 7 cant get it to work without pushing and pressing on the 10 s fairing because of the shape of the nose on it ,horrible creeking noise as i tried to lift her 
its one that fits right under the headstock.
 extra fiver for the 27mm pin that dosent comes in the pack of 5 u get with the stand,waiste of money 
has anybody know of a company that makes one for a 08 10r

[dazman]

Mine is the same, lifts the nose on the fairing a little but hasn't done any damage !!

[doug_zx10r]

If it's a Micron, didn't the pack come with a blank, so you can turn it down to suit your bike?

[eck in fife 08]

Mine is the same, lifts the nose on the fairing a little but hasn't done any damage !!

 :dontknow:oh man just didnt want to lift her all the way not knowing if it would hold properly.

usually a bit of a hashy fecker and didnt want to have broken plastic on my new scoot 

ill give it another go but dazzman ill hunt you down if  it goes wrong 

[HammyUK]

Same on mine - just lift it.
If its a drama then "adjust" it so there is more clearance below the nose.
A 5lb hammer normally does the trick.