Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[zxyogi]

awwww fook!!....dunno what to do,buy or not to buy?!?! 

[simple]

Stop fooking about you mincer !!

You KNOW what to do 

[Cobra88]

Hi Guys

Nope Yogi don't want them

but no problem they will go

Regards
Rick

[zxyogi]

I do I do...but....dunno....... 

[Cobra88]

Jesus Yogi!

Gordon Brown is a better decision maker! 

no problem mate

Regards
Rick

PS: they will also fit a 04-07 ZX10R if you get another set of Rear spacers turned up to reduce the spindle size
spacers fit into the bearings to allow multi fitment and the only difference between the Braking 10R wheels is the spacer kit as the wheels are same part number.
I know 5 people on the USA Z1000 forums with ZX10R wheels on their Z1000 too so they go either way really as long as you can get the spacers knocked up.

[zxyogi]

Update....UPDATE.....for those interested!! 

Put me Rex on the Dyno near Foxes/Harleys diner,cant remember the name....its me age!! 

Anyway,with my ZZR11 cams,st3 DJ kit,K&N pods and my full Akro its kicking out 130.7bhp and 75ftlb torque.
Next up is my 1109 big bore kit and 40mm ZZR11 full power carbs,hopefully should be knocking out about 150ish bhp and about 85ftlb torque.

[Andy J]

pathetic 




.....................only joking pal as I guess around 110 standard so that's a healthy number matey    'gizza go meester' 

[roy]

that must be one mean Rex......if you have to keep it in a cage  ............

looking good tho

[davemfox]

Update....UPDATE.....for those interested!! 

Put me Rex on the Dyno near Foxes/Harleys diner,cant remember the name....its me age!! 

Anyway,with my ZZR11 cams,st3 DJ kit,K&N pods and my full Akro its kicking out 130.7bhp and 75ftlb torque.
Next up is my 1109 big bore kit and 40mm ZZR11 full power carbs,hopefully should be knocking out about 150ish bhp and about 85ftlb torque.

Nice 

What about running a set of 39 or 41 mm FCRs??

Dave

[zxyogi]

.....................only joking pal as I guess around 110 standard so that's a healthy number matey    'gizza go meester' 

98bhp stock....healthy lump about 100bhp.
My engine at the mo is now at ZZR1100 full power mode.

[zxyogi]

What about running a set of 39 or 41 mm FCRs??

Dave

Hello Dave you have mentioned these before,they would give serious bhp increase with a big bore motor......you looking at selling some then?

[TLMONKEY]

.....................only joking pal as I guess around 110 standard so that's a healthy number matey    'gizza go meester' 

98bhp stock....healthy lump about 100bhp.
My engine at the mo is now at ZZR1100 full power mode.

Im sure the last conversation i had with you went something like "Yer,have bought a zrx1100,needed to,to slow me down" 

[zxyogi]

.....................only joking pal as I guess around 110 standard so that's a healthy number matey    'gizza go meester' 

98bhp stock....healthy lump about 100bhp.
My engine at the mo is now at ZZR1100 full power mode.

Im sure the last conversation i had with you went something like "Yer,have bought a zrx1100,needed to,to slow me down" 

 
It has.....top speed wise but getting there is a whole new kettle of fish!! 

[davemfox]

What about running a set of 39 or 41 mm FCRs??

Dave

Hello Dave you have mentioned these before,they would give serious bhp increase with a big bore motor......you looking at selling some then?

Yes mate - I have a set off a '98 R1 which are in pretty good nick. You'd need to check to make sure they can be spaced to fit 

Dave

[zxyogi]

Oooh lOOk....I have cut me Akro from a 450mm longee to a 350mm shortee.....far better,far far better!!!