Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[zxyogi]

Here you go....more pics of your fave Rex!!
Have now fitted the ZX9R wheels and sat in a box in me garage is a 1109 big bore kit and a set of ZZR1100 40mm carbs which will be fitted this winter!!!

 

I might have a set of 41mm FCRs off an R1 which you should be able to space if you are interested??

Dave

FCRs  could well be interested in those dave!!

[Cobra88]

Hi ZXyogi

What size are the front discs mate ?

I am just about to sell my Z1000 (04) forged Braking wheels with 300mm floating waveys on.
they will fit with spacer mods as they fit ZX9 (99-03)

Cool bike
had a 1200 REX for 2 years

Regards
Rick

[zxyogi]

Hi ZXyogi

What size are the front discs mate ?

I am just about to sell my Z1000 (04) forged Braking wheels with 300mm floating waveys on.
they will fit with spacer mods as they fit ZX9 (99-03)

Cool bike
had a 1200 REX for 2 years

Regards
Rick

Thanks for the comment!! 
The discs are ZX9R fitment....310mm i think. The 10R calipers are spaced out to allow for the bigger discs!!

[HammyUK]

Could just put the z1000 wheels and discs straight in Yogi 

[Cobra88]

Hi Guys

the spacer system on the Braking wheels is same as Macheshini/dymag

wheel bearings are about 35mm bore and spacers are shouldered so stay semi captive

the bonus is they will fit just about anything that has std front disc spacing (GSXR/ZX/R1 etc) as long as you make up the correct spacers.

front should be straight swap as i have ZX6R C2 (2006) forks which are identical to ZX10R C/D fork spacing wise (25mm spindle)

rear has a 220mm disk same as ZX6/ZX7/ZX9/ZX10

rear sprocket is 42T 525 pitch Bronze coloured Alloy with hardened teeth (think it's by SunStar) same as Ducati.
Blue ProBolt Sprocket Nuts fitted (in good nick)

Anyway info might help 

Also have the forks for sale but not sure when i can post items in the For Sale area or if i can even see the full thing yet

Regards
Rick

[zxyogi]

Could just put the z1000 wheels and discs straight in Yogi 

............i know i know!!......got me a thinking girlfriend!!!..........bit o modifying..as have a 20mm spindle in mine at the mo,no problems with that....using 04/5 forks.........mmmmmmm!!!

[Cobra88]

Hi Yogi

I might have a spare ZX6R 25mm spindle & tube nut in my drawers (Ooeer!)

spindle ends on ZX6/9 (hole in fork bottoms to locate spindle are 32mm if that helps? (same as 04 ZX10R from what i can tell)

Regards
Rick

Edit:........... found spindle mate (also have spacer rings to suit ZX10R/ZX6R forks (2.5mm thick)
guessing you have removed the REX clockwork speedo drive???

[HammyUK]

Just change the bearings as the 06/07 uses. Liam knows the sizes.

[HammyUK]

You can post  - just might not be able to see it.
PM AndyJ - he might be able to sort something 

[Cobra88]

Hi Hammy

He won't need to change bearings as my wheels are 25mm set already

he just needs spindle which i can chuck in anyway 
just needs to take spacers off calipers as the Braking wavey will work better than the Armstrongs even though they are 10mm smaller.
(Braking use Brembo High Iron content for much higher friction)

they are odd

wheels are branded "Braking" but manufactured by Oz/Brembo (both names stamped on wheels)

Regards
Rick

[HammyUK]

He will as the 04/05 zx10r forks are 20mm spindle size - not 25mm like the 06/07.

[Cobra88]

Hi Hammy

I know where your coming from but bear with me.

If he has my wheels with the ZX6R spindle he doesn't need bearings.

where the spindle on the 04 10R fork bottoms it's 32mm bore (not the part that goes through the wheel bearings) but the ends of the spindle shoulders where they clamp into the forks

so with the spindle they will fit fine.

See where i am coming from ?

If he wanted to fit 06-09 ZX10R wheels then,,,,,,yes he would need to change bearings.

but my wheel is complete with the spindle he needs

I think that makes sense

Regards
Rick

[HammyUK]

Err? think so.

[Cobra88]

 

I'm just not good at explaining it i guess

Regards
Rick

[HammyUK]

Not up on the spindle sizes from the 6r thats all.